phase 3

The B-110 is the successor to the B-100, which became the most sold high-end amplifier ever from a Scandinavian audio manufacturer. However, the B-110 takes a giant step forward in terms of musicality. This completely new design is simply sonically superior, because of the high-end details it inherits from its close relation to the B-130 and B-150. The all new B-110 is a true High-End killer!



The volume is controlled by an extremely precise attenuator made of Vishay metal film resistors, which is switched by relays controlled by the microprocessor. Compared to a normal volume potentiometer of the kind used in the majority of all preamps, the resistor network has virtually no self induced noise and an extremely low distortion. This results in an unsurpassed precision and refinement, and the attenuator contains no less than 200 steps! This makes it possible to adjust the volume very precisely (0.5 dB) even when the sound is so low that an ordinary volume control would create an uneven balance between left and right.



The B-110 output stage utilizes Densen’s unique ”DMCD” (Densen Mass Current Distribution) technology. The B-110 is, as with all other Densen amplifiers, a true non-feedback construction (no global or local feedback), The DMCD technology also secures an extremely firm grip on the speakers combined with a fast, precise and truly transparent sound.



The B-110 is built using surface mounting techniques, and the components are mounted with a precision of 0.02mm (!) using silver solder. The power supply is massive, consisting of a 360VA transformer and having a storage capacity of 70.000uF. The B-110 delivers 60W in 8 ohm and 120W in 4 ohm.



The B-110 contains sockets for the SB Board for surround (See Accessories), DP-03 and DP-06 MM and MC stages. There is also the possibility of upgrading the B-110 with the DNRG external power supply to further enhance the sound quality, so as to experience truly breathtaking musical experiences. The B-110 is also prepared for the SAXO electronic crossover, so that the B-110 can be used in active systems. This is done by mounting the crossover internally in the B-110 in a socket. The SAXO crossover will fit all passive speakers on the market.


The DenLink system implemented in all Densen products allows 2-way communication in multi-room installations.