phase 3

The B-320 is the successor to the critically acclaimed B-300XS and is built directly on the B-300XS. The B-300XS was the most sold Densen power amp ever. Now it has been tweaked and fine tuned to deliver an even more impressive performance. The B-320 contains an output stage built using Densen's unique DMCD technology. This makes the B-320 extremely fast and precise, while retaining unlimited control of the speakers that are connected. 



The B-320 is built using surface mounting techniques and the components are mounted to a precision of 0.02mm using silver solder. As a special feature, the emitter resistors consist of twelve 0.1% metal film resistors in parallel (per output transistor = 96 resistors in total), ensuring no induction and, at the same time, a large surface for passing the substantial audio signals to the output terminals. Since they are in parallel, they actually have a much improved sonic signature compared to the conventional solution with a single resistor.

The B-320 delivers 2x100W at 8 ohm, and 2x200W in 4 ohm. The mains transformer is wound in a special way to lower the noise floor and actively function as a shielding transformer.



By using a new power supply set-up, the B-320 also has an extremely "dark" background, which makes the amplifier sound extremely controlled, but still provides lots of emotion and spark.



No local or global feedback is one of the key issues with all Densen designs, including the B-320. This technology is now further improved with Densen’s new patent pending DMCD circuit. DMCD stands for Dense Mass Current Distribution, and by using the DMCD circuit, the current is at all times present at the output terminal. This results in an extremely low output impedance and a truly non-feedback amplifier.



There is also a D-Sub15 connector, allowing for DenLink connection to other Densen products, such as auto power on/off from a Densen preamp or integrated amp.



The output terminals are doubled for easy bi-wiring.



The B-320 is also prepared for Densen’s SAXO electronic crossover, so that the B-320 can be used in active systems. This is done by mounting the crossover in an internal socket. The SAXO crossover is user adjustable and will fit all speakers on the market.